Kenwood KMM-BT305 Instruction Manual 1 - Page 11
Change the crossover type - firmware update
View all Kenwood KMM-BT305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
GETTING STARTED [DISPLAY] [EASY MENU] [TUNER SETTING] [PRESET TYPE] [SYSTEM] [KEY BEEP] [SOURCE SELECT] [SPOTIFY SRC] [BUILT-IN AUX] [P-OFF WAIT] [F/W UPDATE] [UPDATE SYSTEM] [F/W UP xxxx] (For ) When entering [FUNCTION]... [ON]: [ZONE 1] illumination changes to white color. ; [OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color. (Page 23) • [ZONE 2] illumination changes to light blue color when you enter [FUNCTION], irregardless of the [EASY MENU] setting. • Refer to the illustration on page 23 for zone identification. [NORMAL]: Memorizes one station for each preset button in each band (FM1/FM2/FM3/MW/LW). ; [MIX]: Memorizes one station for each preset button, regardless of the selected band. (Applicable only if [X'OVER] is set to [2WAY].) [ON]: Activates the keypress tone. ; [OFF]: Deactivates. [ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables. (Page 10) [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 11) Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery. [20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ; [- - -]: Cancels [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated). For details on how to update the firmware, visit . [FACTORY RESET] [CLOCK] [CLOCK DISPLAY] [ENGLISH ESPANOL] [FRANCAIS] [YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels. [ON]: The clock time is shown on the display even when the unit is turned off. ; [OFF]: Cancels. Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected. Change the crossover type 1 Press BSRC repeatedly to enter STANDBY. 2 Press and hold number buttons 4 and 5 to enter crossover select. The current crossover type appears. 3 Turn the volume knob to select "2WAY" or "3WAY", then press the knob. 4 Turn the volume knob to select "YES" or "NO", then press the knob. The selected crossover type appears. • To cancel, press and hold . • To adjust the selected crossover settings, see page 20. Caution: Select a crossover type according to how the speakers are connected. (Page 31, 32) If you select a wrong type: • The speakers may damage. • The output sound level may be extremely high or low. ENGLISH 5