Kenwood KMM-BT305 Instruction Manual 1 - Page 22

BLUETOOTH® [INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; [NO]: Cancels. BLUETOOTH - Audio Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . "PLEASE PAIR YOUR PHONE PIN 0000" appears on the display. 2 Search and select the name of your receiver ("KMM-BT3 "/ "KMM-BT2 ") on the Bluetooth device. 3 Operate the Bluetooth device to confirm pairing. "TESTING" flashes on the display. The connectivity result (OK or NG) appears after the test. PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility PB DL: Phonebook Access profile (PBAP) compatibility To cancel test mode, press and hold B SRC to turn off the unit. While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. Audio player via Bluetooth 1 Press B SRC repeatedly to select BT AUDIO. • Pressing enters BT AUDIO directly. 2 Operate the audio player via Bluetooth to start playback. To Play back/pause Select group or folder Reverse skip/Forward skip Reverse/Fast-forward Repeat play Random play Select a file from a folder/list On the faceplate Press 6 IW. Press 2 / 1 . Press S / T. Press and hold S / T. Press 4 repeatedly. [ALL REPEAT], [FILE REPEAT], [REPEAT OFF] Press and hold 3 to select [ALL RANDOM]. • Press 3 to select [RANDOM OFF]. Refer to "Select a file from a folder/list" on page 9. 16 ENGLISH