Kenwood KMM-BT305 Instruction Manual 3 - Page 31

Removing the unit, Installing the unit in-dash mounting, Installing the unit without mounting sleeve

Get Kenwood KMM-BT305 PDF manuals and user guides View all Kenwood KMM-BT305 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

INSTALLATION/CONNECTION Installing the unit (in-dash mounting) Installing the unit (without mounting sleeve) 1 Remove the mounting sleeve and trim plate from the unit. 2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied). Hook on the top side Orientate the trim plate as illustrated before fitting. Do the required wiring. (Page 32) Dashboard of your car Use only the specified screws. Using wrong screws might damage the unit. Removing the unit 1 Detach the faceplate. 2 Remove the trim plate. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration. Bend the appropriate tabs to hold the sleeve firmly in place. ENGLISH 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
ENGLISH
31
Removing the unit
1
Detach the faceplate.
2
Remove the trim plate.
3
Insert the extraction keys deeply into the slots on each side, then follow the arrows
as shown on the illustration.
Do the required wiring.
(Page 32)
Bend the appropriate tabs to hold the sleeve firmly
in place.
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
Dashboard of your car
Installing the unit (in-dash mounting)
INSTALLATION/CONNECTION
Installing the unit (without mounting sleeve)
1
Remove the mounting sleeve and trim plate from the unit.
2
Align the holes in the unit (on both sides) with the vehicle mounting bracket and
secure the unit with screws (supplied).
Use only the specified screws. Using wrong screws might damage the unit.