Kenwood KMM-BT315U North America - Page 27

AUDIO SETTINGS VOLUME OFFSET -15 to +6 (0): Preset the initial volume level of each source. (Before adjustment, select the source you want to adjust.) SOUND EFFECT SOUND RECNSTR (Sound reconstruction) (Not applicable for HD RADIO/TUNER source, AUX source and SIRIUS XM source.) ON: Creates realistic sound by compensating the highfrequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; OFF: Cancels. SPACE ENHANCE (Not applicable for HD RADIO/TUNER source.) SMALL/ MEDIUM/ LARGE: Virtually enhances the sound space. ; OFF: Cancels. SND REALIZER LEVEL1/ LEVEL2/ LEVEL3: Virtually makes the sound more realistic. ; OFF: Cancels. STAGE EQ LOW/ MIDDLE/ HIGH: Virtually adjust the sound position heard from the speakers. ; OFF: Cancels. DRIVE EQ ON: Boosts the frequency to reduce the noise heard from outside the car or running noise of the tyres. ; OFF: Cancels. SPEAKER SIZE FRONT SIZE 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10: Selects according to the connected speaker size for optimum performance. TWEETER SMALL/ MIDDLE/ LARGE: Selects according to the size range of the connected tweeter for optimum performance. ; NONE: Not connected. REAR 3.5"/ 4"/ 4.75"/ 5"/ 6.5"/ 6.75"/ 7"/ 4×6/ 5×7/ 6×8/ 6×9/ 7×10: Selects according to the connected speaker size for optimum performance. ; NONE: Not connected. SUBWOOFER 6.5"/ 8"/ 10"/ 12"/ 15" OVER: Selects according to the connected speaker size for optimum performance. ; NONE: Not connected. X ' OVER TWEETER FRQ 1KHZ/ 1.6KHZ/ 2.5KHZ/ 4KHZ/ 5KHZ/ 6.3KHZ/ 8KHZ/ 10KHZ/ 12.5KHZ: Adjusts the crossover frequency for the tweeter speaker. GAIN LEFT -8 to 0: Adjusts the output volume of the left tweeter. GAIN RIGHT -8 to 0: Adjusts the output volume of the right tweeter. FRONT HPF F - HPF FRQ 30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency for the selected speakers (high pass filter). ; THROUGH: All signals are sent to the selected speakers. F - HPF SLOPE -6DB/ -12DB/ -18DB/ -24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [F - HPF FRQ].) F - HPF GAIN -8 to 0: Adjusts the output volume of the selected speaker. REAR HPF R - HPF FRQ R - HPF SLOPE (Refer FRONT HPF settings above.) R - HPF GAIN SUBWOOFER SW LPF FRQ LPF 30HZ/ 40HZ/ 50HZ/ 60HZ/ 70HZ/ 80HZ/ 90HZ/ 100HZ/ 120HZ/ 150HZ/ 180HZ/ 220HZ/ 250HZ: Adjusts the crossover frequency for the subwoofer (low pass filter). ; THROUGH: All signals are sent to the subwoofer. SW LPF SLOPE -6DB/ -12DB/ -18DB/ -24DB: Adjusts the crossover slope. (Selectable only if a setting other than [THROUGH] is selected for [SW LPF FRQ].) SW LPF PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. SW LPF GAIN -8 to 0: Adjusts the output volume of the subwoofer. • [SUB-W LEVEL]/ [SUBWOOFER] of [SPEAKER SIZE]/ [SUBWOOFER LPF] of [X ' OVER] is selectable only if [SUBWOOFER SET] is set to [ON]. • [TWEETER], [REAR HPF] and [SUBWOOFER LPF] of [X ' OVER] is selectable only if a setting other than [NONE] is selected for [TWEETER], [REAR] and [SUBWOOFER] of [SPEAKER SIZE]. • Once you have selected the speaker size ([SPEAKER SIZE]), the frequency and slope settings are automatically set for the crossover of the selected speaker. ENGLISH 23