Kenwood KMM-BT325U Instruction Manual 1 - Page 27
Other settings, Bluetooth test mode
View all Kenwood KMM-BT325U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
BLUETOOTH® Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold to exit. To return to the previous setting item, press . Default: [XX] [BT MODE] [PHONE SELECT]* [AUDIO SELECT]* Selects the phone or audio device to connect or disconnect. " " appears in front of the device name when connected. " " appears in front of the current playback audio device. [DEVICE DELETE] [PIN CODE EDIT] (0000) [RECONNECT] 1 Turn the volume knob to select a device to delete, then press the knob. 2 Turn the volume knob to select [YES] or [NO], then press the knob. Changes the PIN code (up to 6 digits). 1 Turn the volume knob to select a number. 2 Press S / T to move the entry position. Repeat steps 1 and 2 until you finish entering the PIN code. 3 Press the volume knob to confirm. [ON]: The unit is automatically reconnected when the last connected Bluetooth device is within the connectable range. ; [OFF]: Cancels. [AUTO PAIRING] [ON]: The unit is automatically paired with the supported Bluetooth device (iPhone/iPod touch) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; [OFF]: Cancels. * You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time. [INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; [NO]: Cancels. Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. • Make sure there is no Bluetooth device paired. 1 Press and hold . "PLEASE PAIR YOUR PHONE PIN 0000" appears on the display. 2 Search and select the name of your receiver ("KMM-BT5 "/ "KMM-X5 "/"KMM-BT3 "/"KMM-BT2 "/"KMR-M3 ") on the Bluetooth device. 3 Operate the Bluetooth device to confirm pairing. "TESTING" flashes on the display. The connectivity result (OK or NG) appears after the test. PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility PB DL: Phonebook Access profile (PBAP) compatibility To cancel test mode, press and hold B SRC to turn off the unit. ENGLISH 23