Kenwood KMR-D772BT Instruction manual - Page 27
Improve the voice quality, Make the settings for receiving a call
View all Kenwood KMR-D772BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
BLUETOOTH® To On the faceplate On the remote control While talking on the first incoming call... Answer another incoming call and Press . hold the current call Press . Reject another incoming call Press . Press . While having two active calls... End current call and Press . activate held call Press . Swap between the current call and held call Press . Press . Adjust the phone volume [00] to [35] (Default: [15]) Turn the volume knob Press or during a call. . • This adjustment will not affect the volume of the other sources. Switch between hands-free and private talk modes Press during a call. • Operations may vary according to the connected Bluetooth device. ( Not available ) Improve the voice quality While talking on the phone... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press . MIC GAIN NR LEVEL ECHO CANCEL Default: XX LEVEL -10 to LEVEL +10 (LEVEL -4): The sensitivity of the microphone increases as the number increased. LEVEL -5 to LEVEL +5 (LEVEL 0): Adjust the noise reduction level until the least noise is being heard during a phone conversation. LEVEL -5 to LEVEL +5 (LEVEL 0): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation. Make the settings for receiving a call 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select an item ( 24), then press the knob. 3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit. To return to the previous setting item, press . ENGLISH 23