Kenwood KNA-L50 Instruction Manual - Page 38

Other External Components Other External Components View Camera NOTE • If [Rear Camera Interruption] is active the camera screen is displayed when you shift the gear to the reverse (R) position. ÑÑDisplay the camera screen 1 Touch [ ] on any screen. hhPopup menu appears. 2 Touch [Camera]. hhView camera screen appears. 3 Adjust each item as follows. To erase the caution message, touch the screen. 1 2 1 Switching the View Camera *1 Touch to change the front view camera or dashboard camera and rear view camera. 2 Camera off Touch to exit the camera screen. *1 When the front camera or dashboard camera, and rear camera are connected with this unit. ÑÑCamera Setup 1 Touch [ ] on any screen. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 3 Touch [Camera]. hhCamera screen appears. 4 Set each item as follows. ■■[Rear Camera Interruption] [ON]: Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. [OFF ](Default): Select this when no camera is connected. ■■[Parking Guidelines] You can display parking guidelines to enable easier parking when you shift the gear to the reverse (R) position. Default is "ON". ■■[Guidelines SETUP] If you select [ON] for [Parking Guidelines], you can adjust the parking guidelines. See To adjust the parking guidelines (P.39). ■■[Front Camera] [ON]: Select this when the front camera is connected. [OFF ](Default): Select this when no camera is connected. ■■[Front Camera Interruption] *2 [10 sec]/ [15 sec]/ [20 sec]: The front camera screen is displayed when return the gear from the reverse (R) position. [OFF]: Cancel. *2 If you select [ON] for [Front Camera]. And when Dashboard Camera is not connected with this unit. 38