Kenwood KRC-259R User Manual - Page 15

Programme Type (PTY) Function Conduct auto seek tuning only on those stations with selected kinds of programmes. Selecting Type of Programme to be Received: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 2 Press the ¢ button repeatedly until "PTY" appears in the display. Press the 4 button to search in the other direction. 3 Press either the AM button or FM button. The PTY indicator will turn on, and the Programme Type Selection (PTY) Mode entered. If you make no key input in 30 seconds, the mode will automatically turn off. NOTE • You cannot use this function whilst the traffic information function is turned on. • The time is not displayed until you have turned off the programme type function. NOTE Changing the Display Language to French or German In the PTY mode, hold down the CLK button for one second or more to display the name of the language currently used. If you want to change the language, press the preset button for the desired language and then the CLK button. English is #1, French is #2, and German is #3. 4 Select the type of programme to be received • Press either the FM or AM buttons repeatedly to select the type of programme you want to listen to. The selection includes: Speech £ 1.News £ 2.Current Affairs £ 3.Information £ 4.Sports £ 5.Education £ 6.Drama £ 7.Culture £ 8.Science £ 9.Varied £ 10.Pop Music £ 11.Rock Music £ 12.M,O,R Music £ 13.Light Classical £ 14.Serious Classical £ 15.Other Music £ Music £ Speech £ (Speech.....1~9, Music.....10~15) • You can select the type of programme directly by pressing a preset button. The buttons are factory-set to the following type of programmes: 1. Music 2. Speech 3. News 4. Other Music 5. Serious Classical 6. Varied NOTE Changing the Preset Button Settings for Programme Type After selecting the type of programme to be stored in a certain preset button, hold down that button for two seconds or more. The previously stored data for that button are erased and the new programme type is stored. 5 Seeking the selected programme type Press the 4 or ¢ button to make a seek of frequencies with your selected type of programme. The display blinks and the seek starts. If your selected type of programme is found, the name of the station is displayed and the station is tuned into. The PTY indicator blinks in the display for about 30 seconds. If you make no key input in 30 seconds, the PTY selection mode will turn off automatically. NOTE If no programme can be found, "NO PTY" is displayed. If you want to select another type of programme, repeat steps 4 and 5 above. Switching to Other Stations with the Same Type of Programme: When the PTY indicator is blinking in the display, perform auto seek tuning. The tuner scans for another station with the same type of programme. Cancelling Programme Type Function During Its Operation: Press the MENU button. - 15 -