Kenwood KRC-259R User Manual - Page 9

Menu System To accommodate a greater number of functions, a menu system has been employed for making settings. Press the MENU button to enter the menu mode and then display the function to make the setting. Details on each setting are explained separately in the corresponding function page. 1 Hold down the MENU button for one second or more. "MENU" is displayed when the menu mode is entered. The function that you can adjust is indicated with the current settings displayed. 2 Selecting function to set Press the ¢ button to search through the functions until you see the one you want to adjust in the display. Press the 4 button to search through the functions backward. Example: If you want to switch the tuning mode from manual to automatic, first search through the functions until you see "MANUAL" in the display. 3 Changing setting for currently displayed function Press either the AM or FM button. The setting will change for each function. Example: The tuning mode will switch from manual to automatic, and "AUTO" is displayed. With the programme type function and the auto memory function, the function will start to activate. NOTE To use the auto memory function, hold down either the AM or FM button for two seconds or more. 4 Ending the menu mode Press the MENU button. Function Disabled System Indicator Selectable Illumination News Bulletin Function Local seek Selecting Tuning Mode Auto Memory Entry *AF Function *Region Restrict Function *Auto TP Seek *Monaural Reception *Programme Type Varieties of settings for each function (display) ↓(KRC-259R/21R/159RA,RG) DSI ON ↔ DSI OFF ↑↓(KRC-259R/21R) COL GRN ↔ COL AMB ↑↓ NEWS 00M ↔ NEWS OFF ↑↓ LO.S ON ↔ LO.S OFF ↑↓ AUTO ↔ MANUAL ↑↓ A-MEMORY (start) ↑↓ AF ON ↔ AF OFF ↑↓ REG ON ↔ REG OFF ↑↓ ATPS ON ↔ ATPS OFF ↑↓ MONO ON ↔ MONO OFF ↑↓ PTY (PTY mode entered) ↑ NOTE • Make sure to end the menu mode when finished. If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function, the News Bulletin function with PTY news timeout setting, and the Alarm function. • Some tuner functions will not be displayed unless you are currently listening to the tuner. • Functions marked with an asterisk (*) cannot be used during AM reception. • The News function turns on when the setting is made for the news interruption interval. The "00M" display indicates the setting selected for the news interruption timeout interval. - 9-