Kenwood KRC-25RA User Manual - Page 21
Touch Sensor Tone, Manual Time Adjustment, Automatic Time Adjustment, Power OFF Timer
View all Kenwood KRC-25RA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Touch Sensor Tone This function produces a beep sound that accompanies button operation. It can be switched on or off. Display and setting: "BEEP ON" : Beep setting is on. "BEEP OFF" : Beep setting is off. NOTE The beep sound is not output from the preout jacks. Manual Time Adjustment Adjust the time manually. NOTE This adjustment is available only when the automatic time adjustment is set to off. Display and setting: 1 Select the display "CLK ADJ" during the selecting function in the menu system. 2 Hold down either the 4 or ¢ button for two seconds or more to enter the Manual time adjustment mode. The time display will blink. 3 • Adjusting the hours Press the FM button to advance the hours, or press the AM button to make the hours go back. • Adjusting the minutes Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back. set the time manually if the automatic time adjustment function is turned off. The factory default is automatic time adjustment. Display and setting: "SYNC ON" : Automatic time adjustment "SYNC OFF" : Manual time adjustment Adjusting Time Automatically: Tune into an RDS station for 3 or 4 minutes. The time adjusts automatically to the correct local time. NOTE The time is not adjusted when the RDS station you are tuned to is not transmitting a time signal. Choose another RDS station in such a case. Power OFF Timer Set the time for the OFF Timer function activated when you selected Standby mode. If the predefined time elapses, this unit's power is automatically turned off. Display and setting: "OFF ___" :Power OFF Timer function is canceled. "OFF 20M" :Unit's power goes OFF after 20 minutes. "OFF 40M" :Unit's power goes OFF after 40 minutes. "OFF 60M" :Unit's power goes OFF after 60 minutes. NOTE The factory default is "OFF 20M" . Automatic Time Adjustment With automatic time adjustment, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). You can also - 21 -