Kenwood M1GC7 User Manual - Page 10

For first use Recharging Battery/ Connecting a PC Connect the Player to a PC to transfer music from the PC to the Player and to recharge its battery. Recharging Battery/ Connecting a PC Using the provided USB cable, connect the Player to a PC. • Start up the PC before connecting the Player. • The Player is switched ON automatically at the moment it is connected to the PC. • When the USB connection, always use a supplied USB cable. • The player should be connected directly to the USB port of the PC. We cannot guarantee the operation if the player is connected via a USB hub. PC system configuration requirements OS Microsoft® Windows® XP/2000 USB connector Compliant to USB 1.1/2.0 standard (USB 2.0 recommended) • All of the above specified PC environment does not guarantee full operation of the Player. • Use a PC in which either OS mentioned above is preinstalled. Operation is not guaranteed on a PC running an upgraded OS or a PC assembled by yourself. The Player and PC can be connected in either connection mode below. • Storage Mode for data transfer and battery recharging. The Player cannot be operated while it is connected in this mode. • Player Mode for operating the Player for playback, etc., while recharging the battery. Data transfer from the PC is not available in this mode. 1 Connect the Player to a PC. See page 10. 2 Select the connection mode. 64#
NPEF 4UPSBHF 1MBZFS Recharging and battery indication == == (White) (White) (Red) Shows the remaining power of the battery. Indications during recharging. The battery is nearly exhausted. Recharge it if it is rechargeable. (Red) The battery is not inserted or not rechargeable. (ON) The indicator lights during recharging. (OFF) The indicator is extinguished when recharging completes. Recharging completes in about 3 hours. • The Player can recharge only the NB-3A90 rechargeable battery that is provided but also available optionally. Never attempt to recharge a battery other than the dedicated battery from Kenwood. 10 English