Kenwood NX-3320 User Manual 1 - Page 12
Preparation
![]() |
View all Kenwood NX-3320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
PREPARATION INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK CAUTION ● Do not short the battery terminals or dispose of the battery by fire. ● Never attempt to remove the casing from the battery pack. ● Install the battery pack after cleaning the battery pack contacts and the transceiver terminals. ● Before charging a battery pack that is attached to the transceiver, ensure that the safety catch is firmly closed. . ● If the release latch is tilted and the battery pack is not attached to the transceiver, return the release latch to its original position using your finger. Release latch 1 Match the guides of the battery pack with the corresponding grooves on the upper rear of the transceiver, then firmly press the battery pack to lock it in place. 2 Lock the safety catch to prevent accidentally pressing the release latch and removing the battery pack. 3 To remove the battery pack, lift the safety catch, press the release latch, then pull the battery pack away from the transceiver. 1 2 3 Release latch Safety catch 12
![](/manual_guide/products/kenwood-nx3200-user-manual-3581da8/12.png)