Kenwood NX-3320 User Manual 1 - Page 15
Installing The Cap Over The Universal, Connector <nx-3200/ Nx-3300>, Installing The Optional
View all Kenwood NX-3320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
INSTALLING THE CAP OVER THE UNIVERSAL CONNECTOR . 1 If you are not using an optional speaker/ microphone or headset, install the cap over the universal connector. 2 Secure the cap in place using the dressing screw. Universal connector cap . INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE OR HEADSET 1 Insert the guide of the speaker/ microphone or headset connector into the groove of the universal connector. 2 Secure the connector in place using the attached screw. Optional speaker/ microphone Note: ● When not using an optional speaker/ microphone or headset, install the cap over the universal connector. ● The noise canceling function on KMC-54WD Speaker Microphone works using the built-in DSP of the transceiver, and can be used only with the NX-3000 series Portable models. 15