Kenwood NX-3320 User Manual 1 - Page 16
Installing The Cap Over The Speaker, Microphone Jacks <nx-3220/ Nx-3320>, Installing
![]() |
View all Kenwood NX-3320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
INSTALLING THE CAP OVER THE SPEAKER/ MICROPHONE JACKS Note: ● To keep the transceiver water resistant, you must cover the speaker/ microphone jacks with the supplied cap. . 1 If you are not using an optional speaker/ microphone or headset, install the cap over the speaker/ Speaker/ microphone jacks cap microphone jacks. 2 Secure the cap in place using the dressing screw. . INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE OR HEADSET . 1 Insert the speaker/ microphone plugs into the speaker/ microphone jacks of the transceiver. 2 Place the locking bracket over the speaker/ microphone plugs so that the locking tabs insert into the transceiver grooves. 3 Secure the locking bracket in place using the dressing screw. Speaker/ microphone locking bracket 16
![](/manual_guide/products/kenwood-nx3200-user-manual-3581da8/16.png)