Kenwood SW10 Instruction Manual - Page 4

ENGLISH Connection Caution: Before wiring, be sure to remove the wire from the negative terminal of the battery. After completing all wiring, check the correct wirings again. After checking, connect the wire from the negative terminal of the battery. Terminals of Subwoofer POWER/SPEAKER INPUT terminal (for Speaker cords) REMOTE terminal LINE IN terminal (for RCA pin jack) Connecting the remote control unit Connect with the lock part of remote control jack facing down. 8 Remote control Notes: • If the cord is not connected properly, the power indicator on the remote control unit and the illumination on the main unit do not light up. • If the remote control unit is not connected properly or at all, the subwoofer does not output the sound. • Do not insert the remote control connector upside down or forcibly. Otherwise, malfunction may result.  English