Kenwood TH-F6A User Manual - Page 25
Information Channels
![]() |
View all Kenwood TH-F6A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
6 MEMORY CHANNELS INFORMATION CHANNELS 10 Information channels are available for storing radio broadcasting service frequencies, such as weather radio stations and community FM broadcasting stations. For your conveniences, pressing [INFO] instantly recalls the Information channel to B-band. The following frequency data is stored by default. Channel Number Frequency/ Mode/ Memory Name TH-F6A TH-F7E I-1 162.550 MHz/ FM/ WEATHER I-2 162.400 MHz/ FM/ WEATHER I-3 162.475 MHz/ FM/ WEATHER I-4 162.425 MHz/ FM/ WEATHER I-5 162.450 MHz/ FM/ WEATHER No data (Empty) I-6 162.500 MHz/ FM/ WEATHER I-7 162.525 MHz/ FM/ WEATHER I-8 161.650 MHz/ FM/ WEATHER I-9 161.775 MHz/ FM/ WEATHER I-0 163.275 MHz/ FM/ WEATHER You can revise the default channel data, such as the receiving frequencies, modes, and memory names. RECALLING AN INFORMATION CHANNEL Press [INFO] to recall the Information channels. • "I-n" appears, where "n" represents the Information channel number from "0" ~ "9". REPROGRAMMING THE INFORMATION CHANNEL 1 Press [VFO]. 2 Select a desired frequency and mode. 3 Press [F]. 4 Turn the Tuning control or press [ ]/ [ ] to select the memory channel (I-0 to I-9) in which you want to store the data. 5 Press [MR] ([ ] or [MNU]). • A long beep sounds and the Information channel data is now revised. Note: x When you perform the Full reset {page 50}, all the Information channels recover the factory default values. x If you clear an Information Channel data {page 16}, the factory default value is recovered. x You can also transfer the Information Channel data to the VFO or another memory channel. • If the B-band is selected for operation, you can turn the Tuning control or press [ ]/ [ ] to select other Information channels. If the A-band is selected for operation, press [A/B] to move the operation band to the B-band and then select a different Information channel. • To exit the Information channel mode, press [A/B] to select the B-band then press [VFO] or [MR]. Note: If you press [MNf], you can display the receiving frequency in place of the memory name. TH-F7E only: As default, no frequency data is stored in the Information channel. Store the frequency data before using the Information channels. Otherwise, an error beep sounds. 20
![](/manual_guide/products/kenwood-thf6a-user-manual-fac7fa3/25.png)