Kenwood TK-2140 User Manual - Page 30
Reviewing the Messages in the Queue Memory, Automatic Status Response
View all Kenwood TK-2140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Press any key or wait until the pre-programmed timer expires to return to Normal Operation Mode. ■ Reviewing the Messages in the Queue Memory 1 Press the key programmed as Queue to enter Queue Mode. • Depending on how your dealer has set up your transceiver, either the last received message or the first received message is displayed along with the message number. 2 Use the encoder to select the message you want to view (if more than one message is stored in the queue memory). 3 Press the Cs key to cycle through the message, the caller's ID, and the channel which received the message. Press the tB key to toggle between the numeric display and the message display. 4 To erase the message, press and hold the Cs key for more than 1 second. ■ Automatic Status Response If you pre-select a status number and then leave the transceiver in Status Mode, the transceiver will automatically respond with that status number when a request from the base station is received. (The base station request function is optional.) SHORT MESSAGES FEATURE Received short messages (maximum of 48 characters) are displayed the same as Status messages {page 25}. "Q" (Queue) and the message number appear with the message. 26