Kenwood TM-271A User Manual - Page 37

USING THE MICROPHONE KEYPAD You can also recall a Memory Channel by entering a desired Memory Channel number with the microphone keypad. 1 Press [MR] to enter Memory Recall mode. 2 Press the microphone key assigned the ENTER function. 3 Enter the channel number using the microphone keypad. • For single-digit channel numbers, enter "0" first or press Mic Enter after entering the channel number. • For two-digit channel numbers that begin with "1", press Mic Enter after entering the channel number. Note: ◆ You cannot recall an empty Memory Channel. An error beep sounds. ◆ You cannot recall the Program Scan Memory Channels (L0/U0 ~ L2/U2), the Priority Channel (Pr), and the Weather Alert Channel (AL) (K market models only) using the numeric keypad. ◆ When you recall an odd-split memory channel, "+" and "-" appear on the display. Press [REV] to display the transmission frequency. ◆ After recalling a Memory Channel, you may modify data such as Narrow Band, Tone, or CTCSS. However, these settings are cleared once you select another channel or the VFO Mode. To permanently store the data, overwrite the channel contents. CLEARING A MEMORY CHANNEL To erase an individual Memory Channel: 1 Recall the Memory Channel you want to erase. 2 Press [ ] (Power) (1s) to switch the transceiver OFF. 3 Press [MR]+[ ] (Power). • An erase confirmation message appears. 4 Press [MR] to erase the channel data. • The contents of the Memory Channel are erased. 7 • To quit clearing the Memory Channel, press any key other than [MR]. Note: ◆ You can also clear the Priority Channel, the AL Channel, and L0/U0 ~ L2/U2 data. (The Call Channel cannot be cleared.) ◆ To clear all Memory Channel contents at once, perform Full Reset {page 67}. ◆ You cannot clear channels while in Channel Display Mode. 31