Kenwood TM-271A User Manual - Page 41
CALL], Tuning, MR] 1s
View all Kenwood TM-271A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
CALL CHANNEL Call Channel default settings: • On K and M market models, pressing [CALL] changes the transceiver to the Call Channel. • On E market models, pressing [CALL] causes the transceiver to transmit a 1750 Hz tone {page 25}. The Call Channel can be recalled instantly no matter what frequency the transceiver is operating on. For instance, you may use the Call Channel as an emergency channel within your group. In this case, Call Scan {page 43} will be useful. The default Call Channel frequency is 144.000 MHz. Note: Unlike Memory Channels 0 to 199, the Call Channel cannot be cleared. RECALLING THE CALL CHANNEL 1 Press [CALL] to recall the Call Channel. • The Call Channel frequency and "C" appear. • To return to the previous frequency, press [CALL] again. REPROGRAMMING THE CALL CHANNEL 1 Select your desired frequency and related data (Tone, CTCSS, DCS, or offset direction, etc.). • When you program the Call Channel as an odd-split channel, select a reception frequency first. 2 Press [F]. • A Memory Channel number appears and blinks. 3 Turn the Tuning control or press Mic [UP]/[DWN] to select the Call Channel ("C"). 4 Press [MR]. • The selected frequency and related data are stored in the Call Channel. 7 To also store a separate transmit frequency, continue with the following steps: 5 Select the desired transmission frequency. 6 Press [F]. 7 Turn the Tuning control or press Mic [UP]/[DWN] to select the Call Channel ("C"). 8 Press [MR] (1s). • The separate transmission frequency is stored in the Call Channel. 35