Kenwood TM-D700E User Manual 1 - Page 78
Speaker Mute, Changing Tx/rx Deviation Tm-d700e Only, Changing Speaker Configurations
View all Kenwood TM-D700E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
CHANGING SPEAKER CONFIGURATIONS This transceiver has two speaker jacks. You can enjoy a variety of speaker configurations by using one or two external speakers. Access Menu 1-2-3 (SPEAKER) and select mode 1 (default) or 2, depending on how the internal and/or external speakers should function. SPEAKER MUTE While receiving or transmitting on the TX band, you may not want to hear audio received on the other band. Use this function to mute the speaker allocated to that band (not TX band). Press [MUTE] to switch the function ON (or OFF). • "MUTE" appears when the function is ON. Connection Only SP1 jack connected with an external speaker Only SP2 jack 14 connected with an external speaker Both SP1 and SP2 jacks connected with external speakers Mode Mode 1 Mode 2 Mode 1 Mode 2 Mode 1 Mode 2 Band A Band B External External External Internal External External Internal External External 2 External 1 External 1 External 2 CHANGING TX/RX DEVIATION (TM-D700E ONLY) This transceiver is capable of switching between wide and narrow deviations to receive or transmit. After selecting the desired band, access Menu 1-3-6 (WIDE/ NARROW) and switch between Wide (default) and Narrow. • When Narrow is selected, "N" appears beside the frequency. Note: Do not select Narrow for the band configured as a data band. The selection of Narrow is invalid on the data band. 72