Kenwood TM-D710GA Instruction Manual 1 - Page 17
TONE], REV] 1s, BAND SEL VOL Control, BAND SEL], BAND SEL] 1s, SQL Control
View all Kenwood TM-D710GA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
g TONE Press [TONE] to turn the Tone function ON. Each time you press [TONE], the function cycles through the following: Tone ON ➡ CTCSS ON ➡ DCS ON ➡ Cross Tone ON ➡ OFF. h REV Press [REV] to turn the Reverse function ON or OFF. Press [REV] (1s) to turn the Automatic Simplex Checker ON. i LOW Press [LOW] to toggle the transmit output power as follows: Middle Power ➡ Low Power ➡ High Power. j PF1 Press [PF1] to activate its programmable function. The default function is "Weather Channel" (TM-D710GA)/"Frequency Band Select" (TM-D710GE). k PF2 Press [PF2] to activate its programmable function. The default function is "Operation Band Select". l BAND SEL (VOL) Control Rotate the [BAND SEL] control to adjust the speaker volume. Press the left [BAND SEL] to select the A band. Press the right [BAND SEL] to select the B band. Press [BAND SEL] (1s) to toggle between single and dual-band mode. m SQL Control Rotate the [SQL] control to adjust the squelch level. Clockwise tightens the squelch and counterclockwise opens the squelch. n TNC Press [TNC] to turn the built-in TNC ON and the APRS (or NAVITRA) mode ON. Each time you press [TNC], the mode toggles as follows: APRS (or NAVITRA) mode ON ➡ PACKET mode ON ➡ TNC OFF. • When the built-in TNC turns on, "OPENING TNC" appears on the display. • When "OPENING TNC" appears on the display, the mode cannot be changed. o PM Press [PM] to enter the PM (Programmable Memory) channel selection mode. p Press [ ] to turn the transceiver power ON and OFF. 9