Kenwood TM-D710GA Instruction Manual 1 - Page 44
Character Entry
View all Kenwood TM-D710GA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
1 Available only when the optional VGS-1 unit is installed in the transceiver. 2 Available only for TM-D710GA. Note: The default settings are subject to change. CHARACTER ENTRY Certain menus require you to enter characters, such as the power on message and memory names. When character entry is required, a cursor will appear on the display. 1 Press the Tuning control. • The cursor will blink. 2 Rotate the Tuning control to select your desired character. 3 Press the Tuning control to set the selected character. • The cursor will move to the next digit. • You can move the cursor to the left or right by pressing [] or []. • You can insert one space by pressing [SPACE]. • You can insert a character by pressing [INS]. • You can delete the selected character by pressing [CLR]. 4 Repeat steps 2 and 3 to enter the remaining characters. • Press [ESC] at any time to exit Menu mode. • Press [BACK] at any time to cancel the Menu setup and return to the Menu selection. 36