Kenwood VR-9050 Instruction Manual - Page 20

Normal playback Preparing for playback Some preparatory steps are needed before starting playback. SPEAKERS (POWER ON/STANDBY) INPUT MODE Listening to a source component VOLUME CONTROL Input Selector keys AV AUX/GAME Turning on the receiver 1 Turn on the power to the related components. 2 Turn on the power to this receiver by pressing the (POWER ON/STANDBY) key. Selecting the input mode If you have selected a component connected to the CD/DVD, VIDEO 2, VIDEO 3 or DVD/6CH jacks, make sure that the input mode setting is correct for the type of audio signal to be used. 8 Selecting the speaker system Press the SPEAKERS key to select the speaker system to be used. A ON : B ON : A+B ON : A+B OFF : Sound from the speakers connected to the SPEAKERS A terminals on the rear panel. Sound from the speakers connected to the SPEAKERS B terminals on the rear panel. No sound will be heard from the subwoofer. Sound from both the speakers connected to the SPEAKERS A and B terminals on the rear panel. No sound from the speakers. The display segments are different depending on the type of input signal. The indicator for the speakers you want to use should be lit. SP MUTE L C R A B CLIP LFE SL S SB SR • Selecting "6CH INPUT" by pressing the INPUT MODE key, whereby "DVD/6CH" is the input source will cause SPEAKERS A to be selected automatically. • When the SPEAKERS B is turned ON, the Listen mode will be switched to STEREO. Input Selector keys VOLUME %/fi 1 Use the Input Selector keys or AV AUX/GAME key to select the source you want to listen to. Selecting a source using each key. 1 TUNER 2 CD/DVD 3 MD/TAPE 4 VIDEO 1 5 VIDEO 2 6 VIDEO 3 7 DVD/6CH 8 PHONO 9 AV AUX [GAME] (or AV AUX) 2 Start playback from the selected source. 3 Use the VOLUME CONTROL knob or VOLUME %/fi keys to adjust the volume. Set up the AV AUX jacks on the front panel Perform the setup for convenience of playing a video game using the receiver. 1 Use the AV AUX/GAME key to select "AV AUX [GAME]" (or "AV AUX"). 2 Press and hold the AV AUX/GAME key for more than 2 seconds for the following selections; 1 AV AUX [GAME] : When the connected game player is turned ON, the input selector is switched automati- cally to "AV AUX [GAME]". In addition, the ACTIVE EQ function is switched to "ACTIVE EQ GAME", and the Listen mode is switched to the appropriate mode for games. 2 AV AUX : The game mode is switched off. • The game mode is not activated if no video signal is input to the VIDEO or S-VIDEO jack in the AV AUX jack section. 20 EN