Kenwood VR-9050 Instruction Manual - Page 36

Specifications AUDIO section Rated power output during STEREO operation 100 watts per channel minimum RMS, both channels driven, at 8 Ω from 20 Hz to 20 kHz with no more than 0.09% total harmonic distortion. (FTC) Effective power output during SURROUND operation FRONT (20 ~ 20 kHz, 0.09 % T.H.D., at 8 Ω one channel driven 100 W + 100 W CENTER (20 ~ 20 kHz, 0.09 % T.H.D., at 8 Ω one channel driven 100 W SURROUND (20 ~ 20 kHz, 0.7 % T.H.D., at 8 Ω one channel driven 100 W + 100 W SURROUND BACK (20 ~ 20 kHz, 0.7 % T.H.D., at 8 Ω one channel driven 100 W + 100 W Total harmonic distortion 0.009 % (1 kHz, 50 W, 8 Ω) Frequency response CD/DVD 10 Hz ~ 100 kHz, +0 dB ~ -3.0 dB PHONO 'RIAA' response 40 Hz ~ 20 kHz, +1.5 dB ~ -3.0 dB Maximum input level PHONO (MM 40 mV, 1 % T.H.D., at 1 kHz Signal to noise ratio (IHF'66) PHONO (MM 75 dB CD/DVD 95 dB Input sensitivity / impedance PHONO (MM 7 mV / 47 kΩ CD/DVD, MD/TAPE, AV AUX, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH 500 mV / 47 kΩ Output level / impedance MD/TAPE REC 500 mV / 1 kΩ PRE OUT (SUBWOOFER 1 V / 1 kΩ Tone control BASS 10 dB (at 100 Hz) TREBLE 10 dB (at 10 kHz) Loudness control VOLUME at -30 dB level 6 dB (100 Hz) DIGITAL AUDIO section Sampling frequency 32 kHz, 44.1 kHz, 48 kHz, 96 kHz Input level / impedance / wave length Optical 15 dBm ~ -24 dBm), 660 nm ±30 nm Coaxial 0.5 Vp-p / 75 Ω Caution : Read this page carefully to ensure safe operation. VIDEO section VIDEO inputs / outputs VIDEO (composite 1 Vp-p / 75 Ω S VIDEO inputs /outputs S VIDEO (luminance signal 1 Vp-p / 75 Ω S VIDEO (chrominance signal 0.286 Vp-p / 75 Ω COMPONENT VIDEO inputs /outputs COMPONENT VIDEO (luminance signal 1 Vp-p / 75 Ω COMPONENT VIDEO (CB/CR-signal 0.64 Vp-p / 75 Ω FM tuner section Tuning frequency range 87.5 MHz ~ 108.0 MHz Usable sensitivity (MONO 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB) 50 dB quieting sensitivity STEREO 28 µV (75 Ω)/ 40.2 dBf (75 kHz dev) Total harmonic distortion MONO (1 kHz, 75 kHz dev 0.5% (65 dBf input) STEREO (1 kHz, 67.5 + 6.75 kHz dev) ......... 0.7% (65 dBf input) Signal to noise ratio MONO (1 kHz, 75 kHz dev 75 dB (65 dBf input) STEREO (1 kHz, 67.5 + 6.75 kHz dev) ....... 68 dB (65 dBf input) Stereo separation (1 kHz 40 dB Selectivity (±400 kHz 70 dB Frequency response (30 Hz ~ 15 kHz 0.5 dB, -3.0 dB AM tuner section Tuning frequency range 530 kHz ~ 1,700 kHz Usable sensitivity (30% mod, S/N 20 dB 16 µV / (600 µV/m) Signal to noise ratio (30% mod, 400 Hz 50 dB (60 dBµV EMF input) GENERAL Power consumption 3.4 A Standby Power consumption Less than 1 W AC outlet SWITCHED total 150 W, 1.25 A max.) Dimensions W : 440 mm (17-5/16") H : 159 mm (6-1/4") D : 392 mm (15-7/16") Weight (Net 11.7 kg (25.8 lb) Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature). 36 EN For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model Serial Number