Kenwood VR9070 Instruction Manual - Page 20

Preparing for surround sound Speaker settings To enable you to obtain optimum enjoyment from the receiver's listening modes, make sure to complete the speaker settings (Subwoofer, Front, Center, Surround and Surround Back Speakers) as described below. (POWER ON/STANDBY) SETUP MULTI CONTROL SOUND RECEIVER ON SETUP MULTI RCV MODE SOUND 1 Turn on the power to this receiver by pressing the (POWER ON/STANDBY) key or RECEIVER ON key. 2 For the remote control unit, press the RCV MODE key to switch to receiver mode. 3 Press the SETUP key to enter the SETUP mode. Use 5/ ∞ keys or MULTI @/ # keys for the following displays. 1 SP SETUP 2 CROSSOVER 3 TEST TONE 4 BASS PEAK 5 SP DISTANCE 6 LFE LEVEL 7 DISP MODE 8 EXIT The flow of the SETUP is as follows: SP SETUP Subwoofer Front Center Surround Surround Back Subwoofer Re-mix EXIT CROSSOVER TEST TONE FREQ:40Hz FREQ:60Hz FREQ:80Hz-THX FREQ:100Hz FREQ:120Hz FREQ:150Hz T. TONE AUTO L C R SR SBR SBL SL SW T. TONE MANUAL L C R SR SBR SBL SL SW DISP MODE Display Selector Display Listen BASS PEAK SP DISTANCE Front Left Center Front Right Surround Right Surround Back Right Surround Back Left Surround Left Subwoofer LFE LEVEL 4 Select a speaker system. If you have THX certified speakers, please set them to NML/THX. 1 Select the SP SETUP and press the SETUP key again so that the Subwoofer setting indication "SUBW ON" appears. SP MUTE L C SW R A B CLIP LFE SL SB SR STEREO 2 Use the MULTI CONTROL knob or MULTI %/fi keys to select the appropriate Subwoofer setting. 1 SUBW ON :Subwoofer setting mode to the receiver is ON. 2 SUBW OFF :Subwoofer setting mode to the receiver is OFF. • The initial setting is "SUBW ON". • When the setting "SUBW OFF" is selected, the Front Speakers are automatically set to "FRNT LARGE" and the procedure skips to step 6. • When Subwoofer output sound is required, select "FRNT NML/ THX", or select both "FRNT LARGE" and "SW RE-MIX ON". 3 Press the 5 key or MULTI # key to accept the setting. • The Front Speakers setting indication "FRNT" appears. SP MUTE L C SW R A B CLIP LFE SL SB SR STEREO 4 Use the MULTI CONTROL knob or MULTI %/fi keys to select the appropriate Front Speakers setting. 1 FRNT NML/THX : Average size Front Speakers are connected to the receiver. 2 FRNT LARGE : Large size Front Speakers are connected to the receiver. 5 Press the 5 key or MULTI # key to accept the setting. • The Center Speaker setting indication "CNTR" appears. 6 Use the MULTI CONTROL knob or MULTI %/fi keys to select the appropriate Center Speaker setting. If you selected "FRNT LARGE" as the Front Speakers setting, 1 CNTR NML/THX : An average size Center Speaker is con- nected to the receiver. 2 CNTR LARGE : A large size Center Speaker is connected to the receiver. 3 CNTR OFF : Center Speaker setting mode to the re- ceiver is OFF. If you selected "FRNT NML/THX" as the Front Speakers setting, 1 CNTR NML/THX : An average size Center Speaker is connected to the receiver. 2 CNTR OFF : Center Speaker setting mode to the receiver is OFF. 7 Press the 5 key or MULTI # key again to accept the setting. • The Surround Speaker indication "SURR" appears. 8 Use the MULTI CONTROL knob or MULTI %/fi keys to select the appropriate Surround Speaker setting. If you selected "FRNT LARGE" as the Front Speaker setting, 1 SURR NML/THX : Average size Surround Speakers are con- nected to the receiver. 2 SURR LARGE : Large size Surround Speakers are con- nected to the receiver. 3 SURR OFF : Surround Speaker setting mode to the receiver is OFF. 20 EN