Kenwood VR9070 Instruction Manual - Page 4
Preparing the remote control, Unpacking
UPC - 019048161697
View all Kenwood VR9070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Before applying the power Unpacking Unpack the unit carefully and make sure that all accessories are present. FM indoor antenna (1) AM loop antenna (1) Preparing the remote control Loading the batteries 1 Remove the cover. 2 Insert the batteries. Remote control unit (1) RC-R0918 Batteries (R03/AAA) (2) 3 Close the cover. If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future. Keep this manual handy for future reference. • Insert two AAA-size (R03) batteries as indicated by the polarity markings. Operation When the standby indicator is lit, the power turns ON when you press the RECEIVER ON key on the remote control. When the power comes ON, press the key you want to operate. Operating range (Approx.) Remote sensor 6 m RECEIVER ON Infrared ray system • When pressing more than one remote control key successively, press the keys securely by leaving an interval of 1 second or more between keys. Notes 1. The supplied batteries may have shorter lives than ordinary batteries due to use during operation checks. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones. 3. Placing the remote sensor in direct sunlight, or in direct light from a high frequency fluorescent lamp may cause malfunction. In such a case, change the location of the system installation to prevent malfunction. 4 EN