KitchenAid KDRP467KSS Installation Instructions - Page 3

Product, Dimensions, Cabinet Opening - parts

Page 3 highlights

Parts supplied for installation 1" (2.5 cm) 1-3/4" (4.4 cm) 9-1/4" (23.5 cm) 36" (91.4 cm) cooktop width Product Dimensions OFF OFF OFF 2 - #10 x 2" phillips head screws anti-tip brackets • Anti-tip bracket must be securely attached to a wall stud. Thickness of finished wall may require using longer screws to anchor the bracket. • L.P. conversion kit is included in literature package. • Backguard and island trim. The backguard included with the range must be installed when a standard 24" (61 cm) deep base cabinet is used and there is zero clearance between the back edge of range and combustible rear wall. For island installations or other installations with more than 5" (12.7 cm) clearance to back wall, use the optional stainless steel island trim, included with the range, to cover the backguard mounting flanges. 1/4" (6.4 mm) spacer OFF OFF OFF OFF OFF 45" (114.3 cm) overall height 36" (91.4 cm) cooktop height with feet loosened 3/4 turns 26-1/2" (67.3 cm) width with control panel 36" (91.4 cm) width Cabinet Opening Dimensions 13" (33 cm) max. upper cabinet depth 36" (91.4 cm) min. upper cabinet width For minimum clearance to top of range, see Note.* 18" (45.7 cm) upper cabinet to countertop *Note: 42" (106.7 cm) min. when bottom of wood or metal cabinet is protected by not less than 1/4" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper. 48" (121.9 cm) min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet. junction box to be located in this area 36-1/4" (92.1 cm) opening width 8" (20.3 cm) 3-1/2" (8.9 cm) 4" (10.2 cm) min. clearance from both sides of range to side wall or other combustible material above cooking surface 0" (0 cm) clearance from both sides and back of range to adjacent combustible construction below cooking surface 28" (71.1 cm) 10.2 cm (4 po) 20" (50.8 cm) gas line opening to be located in this area 5-1/2" (14 cm) 12" (30.5 cm) 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
3
Parts supplied for
installation
Product
Dimensions
Cabinet Opening
Dimensions
36" (91.4 cm)
cooktop width
36" (91.4 cm)
width
9-1/4"
(23.5 cm)
anti-tip
brackets
1-3/4"
(4.4 cm)
1"
(2.5 cm)
2 - #10 x 2"
phillips head screws
36" (91.4 cm)
cooktop
height with
feet loosened
3/4 turns
45" (114.3 cm)
overall height
13" (33 cm) max.
upper cabinet depth
1/4" (6.4 mm)
spacer
26-1/2" (67.3 cm)
width with
control panel
Anti-tip bracket
must be securely
attached to a wall stud. Thickness of
finished wall may require using
longer screws to anchor the bracket.
L.P. conversion kit
is included in
literature package.
Backguard and island trim.
The
backguard included with the range
must be installed when a standard
24” (61 cm) deep base cabinet is
used and there is zero clearance
between the back edge of range
and combustible rear wall.
For island installations or other
installations with more than 5"
(12.7 cm) clearance to back wall,
use the optional stainless steel
island trim, included with the range,
to cover the backguard mounting
flanges.
36" (91.4 cm) min.
upper cabinet width
36-1/4" (92.1 cm)
opening width
3-1/2"
(8.9 cm)
20"
(50.8 cm)
12"
(30.5 cm)
5-1/2" (14 cm)
8"
(20.3 cm)
18"
(45.7 cm)
upper cabinet
to countertop
gas line opening to be
located in this area
junction box to be
located in this area
4" (10.2 cm) min.
clearance from both sides
of range to side wall or
other combustible
material above cooking
surface
0" (0 cm) clearance from
both sides and back of
range to adjacent
combustible construction
below cooking surface
*Note: 42" (106.7 cm) min. when bottom of wood or metal
cabinet is protected by not less than 1/4" (0.64 cm)
flame retardant millboard covered with not less than No.
28 MSG sheet steel, 0.015" (0.4 mm) stainless steel,
0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
48" (121.9 cm) min. clearance between the top of the
cooking platform and the bottom of an unprotected wood
or metal cabinet.
For minimum
clearance to top of
range, see Note.*
28"
(71.1 cm)
10.2 cm
(4 po)