KitchenAid KDRS407VSD Installation Instructions - Page 14
Awarning
![]() |
View all KitchenAid KDRS407VSD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Electrical Connection - U.S.A. Only 30" (76.2 cm) and 36" (91.4 cm) Models 48" (121.9 cm) Models WARNING WARNING Electrical Shock Hazard Disconnect power before servicing. Use a new 40 amp power supply cord. Plug into a grounded outlet. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Disconnect power. 2. Remove the terminal block cover screws and disengage mounting tabs to remove terminal block cover from back of range. Electrical Shock Hazard Disconnect power before servicing. Use a new 50 amp power supply cord. Plug into a grounded outlet. Failure to follow these instructions can result in death, fire, or electrical shock. ■■ Tighten strain relief screw against the power supply cord. B A C A. Phillips head screws B. Terminal block cover C. 2 mounting tabs at bottom 3. Add power supply cord strain relief. ■■ Assemble a UL listed strain relief in the opening. A A. UL listed strain relief 14 4. Complete installation following instructions for your type of electrical connection: 4-wire (recommended) 3-wire (if 4-wire is not available) Electrical Connection Options If your home has: 4-wire receptacle (NEMA type 14-50R) And you will be connecting to: A UL listed, 250-volt minimum, 40- or 50-amp, range power supply cord Go to section: 4-wire connection: power supply cord 3-wire receptacle (NEMA type 10-50R A UL listed, 250-volt minimum, 40- or 50-amp, range power supply cord 3-wire connection: power supply cord
![](/manual_guide/products/kitchenaid-kdrs463vbk-installation-instructions-d4ab33e/14.png)