KitchenAid KDRS462VSS Installation Guide - Page 17

6. Insert the small grease tray all the way under the front of the grill basin and hook it into the slots. When the 2 grease trays are installed properly, the small grease tray will hook over the large grease tray. A B C Install Griddle (on griddle models) The griddle is factory installed. 1. Place drip tray in the well at the front of the griddle. Slide tray toward the back until it stops. A D A. Large grease tray B. Grease tray connection C. Small grease tray D. Slots 7. Insert the orifice tube on the front of the burner assembly into the opening at the front of the grill basin and set burner assembly into place. A A. Front opening 8. Insert front tabs of the flame spreader into slots at the front of the grill basin, then the rear tabs into the rear slots. B B A. Griddle drip tray B. Griddle 2. Clean griddle before using. Refer to the Use and Care Guide. Electronic Ignition System Install Burner Heads and Caps Install the burner head, making sure the alignment pins are properly aligned with the burner base. Place burner cap (black) on top of the burner head. 20,000 Btu/h Ultra Power™ Dual-Flame Burner A A. Incorrect B. Correct B A A. Front tabs and slots B. Rear tabs and slots 9. Check the surface burner and grill flames. Refer to the "Electronic Ignition System" section. 10. Place the wave tray on top of the flame spreader. 15,000 Btu/h Professional Burner A B 5,000 Btu/h Simmer/Melt Burner A B A. Incorrect B. Correct A. Incorrect B. Correct 11. Place the grill grate into position. 17