KitchenAid KECD867XSS Installation Guide - Page 4

36" (91.4 cm) Cooktop - for standard and electric models Cabinet Dimensions A D C B A A. Model/serial rating/clearance plate location B. 21" (53.4 cm) screw head to screw head C. 22" (52.3 cm) without stainless steel trim or 21 54.8 cm) with stainless steel trim A B C D E F G H I A. 35 90.1 cm) with stainless steel trim B. 35 89.9 cm) without stainless steel trim C. 17 43.8 cm) D. 3 9.6 cm) E. 18 46.8 cm) F. 8 20.9 cm) G. 13 33.3 cm) H. 13 33.2 cm) I. 34 87.6 cm) screw head to screw head C B LE F G H I K J A. 30" (76.2 cm) on 30" (76.2 cm) models 36" (91.4 cm) on 36" (91.4 cm) models B. Combustible area above countertop (shown by dashed box above) C. 30" (76.2 cm) minimum clearance between top of cooktop platform and bottom of uncovered wood or metal cabinet (24" [61 cm] minimum clearance if bottom of wood or metal cabinet is covered by not less than ¹⁄₄" [0.6 cm] flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel, or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper) D. 13" (33 cm) recommended upper cabinet depth E. 2" (5.1 cm) F. 21¹⁄₈" (73.4 cm) G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop within minimum horizontal clearances to cooktop H. Junction box or outlet; 12" (30.5 cm) minimum from bottom of countertop I. Junction box or outlet; 10" (25.4 cm) from right-hand side of cabinet J. 28⁷⁄₈" (73.4 cm) on 30" (76.2 cm) models 34 87.8 cm) on 36" (91.4 cm) models K. 2½" (6.4 cm) minimum distance to nearest left and right side combustible surface above cooktop L. 1½" (3.8 cm) minimum clearance between back wall and countertop NOTES: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the cooktop base. To avoid this modification, use a base cabinet with sidewalls wider than the cutout. ■ A minimum side clearance of 6" (15.2 cm) is recommended between side of cooktop and side wall for maximum ventilation performance. ■ A minimum clearance of 2" (5.1 cm) is recommended between the motor/blower and cabinet for proper cooling. A 6" (15.2 cm) clearance is recommended for servicing access. 4