KitchenAid KFP1320CU Owners Manual - Page 14

Troubleshooting Guide

Page 14 highlights

TROUBLESHOOTING GUIDE Problem If your Food Processor should malfunction or fail to operate, check the following: Is the fuse in the circuit to the Food Processor in working order? The Food Processor may need to cool to room temperature: The motor may be locked: Food Processor not shredding or slicing properly: If the Work Bowl Cover won't close when using the disc: If the problem cannot be corrected: Solution Check to see if the Food Processor is securely plugged into a grounded electrical outlet. Make sure that the Bowl and Lid are properly aligned and locked in place. Have you pressed more than one button at the same time? Unplug the Food Processor, then plug it back into the outlet. If you have a circuit breaker box, be sure the circuit is closed. If the speed light turns off and the Off/Pulse light flashes, wait until the Off/Pulse light turns off and retry. The Food Processor may take from 5-15 minutes to cool completely. If the speed light stays on while the Off/Pulse light flashes, press the Off/Pulse button to reset the motor. Make sure the raised-Blade side of the disc is positioned face up on the Drive Adapter. Make sure ingredients are suitable for slicing or shredding. Make sure the disc is positioned in the process position (near the top of the Bowl), and not the storage position (low and inside of the Bowl). Make sure the disc is installed correctly, and is positioned properly on the Drive Adapter. See the "Warranty and Service" sections. Do not return the Food Processor to the retailer. Retailers do not provide service. 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

14
TROUBLESHOOTING GUIDE
Problem
Solution
If your Food Processor should
malfunction or fail to operate,
check the following:
Check to see if the Food Processor is securely plugged
into a grounded electrical outlet.
Make sure that the Bowl and Lid are properly aligned
and locked in place.
Have you pressed more than one button at the same
time?
Unplug the Food Processor, then plug it back into the
outlet.
Is the fuse in the circuit to the
Food Processor in working
order?
If you have a circuit breaker box, be sure the circuit is
closed.
The Food Processor may need
to cool to room temperature:
If the speed light turns off and the Off/Pulse light flashes,
wait until the Off/Pulse light turns off and retry.
The Food Processor may take from 5-15 minutes to cool
completely.
The motor may be locked:
If the speed light stays on while the Off/Pulse light
flashes, press the Off/Pulse button to reset the motor.
Food Processor not shredding
or slicing properly:
Make sure the raised-Blade side of the disc is positioned
face up on the Drive Adapter.
Make sure ingredients are suitable for slicing or
shredding.
Make sure the disc is positioned in the process position
(near the top of the Bowl), and not the storage position
(low and inside of the Bowl).
If the Work Bowl Cover won’t
close when using the disc:
Make sure the disc is installed correctly, and is positioned
properly on the Drive Adapter.
If the problem cannot be
corrected:
See the “Warranty and Service” sections.
Do not return the Food Processor to the retailer.
Retailers do not provide service.