KitchenAid KGRS205TBT User Instructions - Page 12

Dimensions for Routing Door Panel (Side View) ¹⁄₄" (6.35 mm) max. ¹⁄₂" Top (1.3 cm) min. Center face detail between offsets ³⁄₈" (9.5 mm) min. Bottom ¹⁄₄" (6.35 mm) max. Adjusting Electronic Controls The temperature control range for each compartment is 1 through 7 (coldest). Press the up or down arrow touch pads to adjust the temperature. Except when starting the refrigerator, do not adjust either control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize. If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart below as a guide. CONDITION/REASON: ADJUSTMENT: REFRIGERATOR too warm Adjust REFRIGERATOR Control one setting higher FREEZER too warm/to little ice Adjust FREEZER Control one setting higher REFRIGERATOR too cold Adjust REFRIGERATOR Control one setting lower FREEZER too cold Adjust FREEZER Control one setting lower REFRIGERATOR USE Using the Controls Your model may have Electronic Controls or Digital Controls. IMPORTANT: ■ Wait 24 hours for your refrigerator to cool completely before adding food. If you add food before the refrigerator has cooled completely, your food may spoil. NOTE: Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster. ■ The recommended settings should be correct for normal household refrigerator use. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. ■ If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls. Electronic Controls For your convenience, your refrigerator and freezer controls are preset at the factory. When you first install your refrigerator, make sure the controls are still set to the recommended setting as shown. Recommended Setting "4" To Turn Your Refrigerator Off/On: ■ To turn the refrigerator off, press the freezer down arrow touch pad until a dash (-) appears in both the refrigerator and freezer displays. Neither compartment will cool. Digital Controls For your convenience, your temperature controls are preset at the factory. When you first install your refrigerator, make sure the controls are still set to the recommended set points as shown. Recommended Settings IMPORTANT: When the power is on, the temperature display shows the set point temperature of the compartment. To Turn Your Refrigerator Off/On: ■ Press the freezer (+) touch pad repeatedly until "OFF" appears in the freezer display. Allow a few seconds for the refrigerator to shut off. Neither compartment will cool. ■ Press either the refrigerator or freezer (-) touch pad to turn on the refrigerator. Adjusting Digital Controls The Refrigerator control adjusts the refrigerator compartment temperature. The Freezer control adjusts the freezer compartment temperature. If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart as a guide. To Adjust Set Point Temperatures: The first touch of the (+) or (-) touch pad displays the current temperature set point. ■ Press the (+) or (-) touch pads until the desired temperature set point is displayed. NOTE: Except when first turning on the refrigerator, do not adjust either temperature control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize. 12