KitchenAid KGRS205TBT User Instructions - Page 7
Replace Door and Hinges, Freezer Drawer, Remove Drawer Front, Replace Drawer Front, Final Steps - attachments
View all KitchenAid KGRS205TBT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Replace Door and Hinges NOTE: When reversing panel series door, use alternate top hinge shipped with refrigerator. 1. Replace the parts for the bottom hinge as shown in Bottom Hinge graphic. Tighten screws. Replace the refrigerator door. NOTE: Provide additional support for the refrigerator door while the hinges are being moved. Do not depend on the door gasket magnets to hold the door in place while you are working. 2. Assemble the parts for the top hinge as shown in the Top Hinge Graphic. Do not tighten screws completely. 3. Line up the door so that the bottom of the refrigerator door aligns evenly with the top of the freezer drawer. Tighten all screws. Freezer Drawer IMPORTANT: Two people may be required to remove and replace the freezer drawer. Remove Drawer Front 1. Open the freezer drawer to full extension. 2. Loosen the four screws attaching the drawer glides to the drawer front. See Drawer Front Removal graphic. NOTE: Loosen screws three to four turns. Keep the screws in the drawer front. 3. Lift drawer front upward and off the screws. See Drawer Front Removal graphic. Replace Drawer Front 1. Slide the drawer glides out of the freezer compartment. Insert the screws in the top of the drawer front into the slots in the drawer brackets. See Drawer Front Replacement graphic. 2. Pull the drawer brackets toward you to position the two screws in the bottom of the drawer front into the brackets. See Drawer Front Replacement graphic. 3. Completely tighten the four screws. 4. Replace the base grille. Final Steps 1. Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover. See Top Hinge Graphic. WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 2. Plug into a grounded 3 prong outlet. 3. Return all removable door parts to doors and food to refrigerator. 7