KitchenAid KHMS2050SBL Use and Care Manual - Page 11

Learning Mode The Learning Mode is ideal for learning how to use the microwave oven. When set, functions can be entered, with real displays and tones, without actually turning on the microwave generator (magnetron). While functions are operating in the Learning Mode, the microwave oven light will come on, the fan will run, and the turntable will rotate (if set ON). While the Learning Mode is active, the Learn indicator is visible in the upper, right title area, or at the bottom command input area. The indicator is visible while the microwave oven is in standby mode, during programming, and during Settings & Info menu navigation. During a "practice" cooking cycle, the Learn indicator is visible in the lower, left command input area. A A A. Indicators for Learning Mode To Activate Learning Mode: 1. On the Main Menu, touch "Settings & Info." 2. On Settings & Info screen, touch "More Choices." 3. Touch "Learning Mode." 4. Touch "On" or "Off" to set. 5. Touch "Ok." Tones Tones are audible signals, indicating the following: One Tone ■ Valid entry (short tone) Two Tones ■ Between stages (short tones) ■ Reminder, repeat each minute for 10 minutes after the endof-cycle tones ■ End of Timer countdown ■ Hidden feature entered or exited (very short, quick tones) Three Tones ■ Invalid entry (very short, quick tones) ■ Retry Error Four Tones ■ End of cycle (2 short tones, followed by 2 longer tones) ■ Interruption, tend to food (short tones) ■ Attention - door needs to be opened and closed To Adjust Tone Volume: 1. On Main Menu, touch "Settings & Info." 2. On Settings & Info screen, touch "More Choices." 3. Touch "Volume." 4. Using "+" and "-" controls, increase or decrease the volume setting, or turn the tones off. 5. Touch "Ok." Start The START control will start any function. If non-sensor cooking is interrupted, touching the START control pad will resume the preset cycle. If the microwave oven has not been in use and the door has not been opened in the past 5 minutes, the cooking function will not start. Open and close the door, then touch START to start or resume the cooking cycle. For added convenience, the "Start" touch pad is also available on some display screens, and provides the same function as the START control pad. Off The OFF control stops all functions except for the Timer and Learning Mode, and cancels programming in progress. The microwave oven will also turn off when the door is opened. Close the door and touch START control or "Continue" on the touch screen to resume the cycle. A sensor cooking cycle may not be resumed if interrupted by opening the door. Clear During programming, the CLEAR control changes the numeric programming values, such as minutes, seconds and cook power that are active in the display to their default value. For example, while entering a cook time, touching CLEAR will change the time you have already entered to "0:00." The CLEAR control gives an invalid signal (see "Tones" section) if touched during cooking. 11