KitchenAid KUDE48FXSP Installation Guide - Page 3
Installation Requirements - dishwasher model
View all KitchenAid KUDE48FXSP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
INSTALLATION REQUIREMENTS Tools and Parts Gather the recommended tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. All Installations Tools needed: Supplied in Kit: 4 Plastic studs (attached to each other by runners) 4 Short screws (10-16 hex head screw) 4 Long screws (8-18 Torx® head screws) 1 Template (located inside Use and Care Guide bag assembly) 1 Instruction sheet (located inside Use and Care Guide bag assembly) NOTE: The screws supplied are used for only ³⁄₄" thick wooden panel. If the wooden panel is less than ³⁄₄" thick, customer must purchase screws locally. Other parts you may also need: *Must be the proper size to connect your household wiring to 16-gauge wiring in dishwasher. Other useful items you may need: NOTES: ■ Moisture barrier tape is recommended when installing a dishwasher under a wood countertop. ■ Parts available for purchase in plumbing supply stores. Check local codes. Check existing electrical supply. See "Electrical Requirements" section. It is recommended that electrical connections be made by a licensed electrical installer. In addition, for first-time installations Tools needed: Parts supplied: Parts needed: Parts needed: 4 #10 x ¹/₂" wood screws (if installing custom front panels) Additional parts supplied with top-venting models only: #8 x 1³⁄₈" Torx T15 screws (2) Additional parts supplied with certain models only Make sure all these parts are included in the literature package. If parts are not included, call 1-800-422-1230. †®TORX and T20 are registered trademarks of Saturn Fasteners, Inc. 3