KitchenAid KUDE60FXSS Installation Guide - Page 17

Choose Attachment Option Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. Use 2 or more people to move and install dishwasher. Option 1, Countertop attachment: 1 Remove bracket Tabs must point to the right 2 Insert plastic buttons Plastic button Push the plastic buttons out of the side of the tub. NOTE: Save the buttons to cover the holes after dishwasher is installed. 3 Reinstall bracket Remove the brackets from the package and place in the open slots on the left and right-hand top of the dishwasher collar as shown. 2 Insert bracket Insert the bracket into the slot on the collar. Using a pair of pliers, bend the tab down to secure the bracket in place. Repeat this step for the other side. NOTE: Do not attach the dishwasher. This will be done later. Option 2, Dishwasher side attachment: NOTES: • Remove the brackets from the parts package. • You must predrill pilot holes in cabinet to avoid splitting the wood before installing screws. 1 Break end of bracket Bend tabs Push bracket into slot on the side of dishwasher, and bend tab in toward the side of the dishwasher so that it keeps the bracket in place. Repeat this step for the other side of the dishwasher. NOTE: Do not attach the dishwasher. This will be done later. Move Dishwasher Close to Cabinet Opening Excessive Weight Hazard Use two or more people to move and install dishwasher. Failure to do so can result in back or other injury. Use 2 or more people to move and install dishwasher. Score line Break off the end of the bracket along the scored line. With another person holding the rear of the dishwasher to keep it from tipping, open dishwasher door and place towel over pump assembly and spray arm of dishwasher. This will keep screws from falling into pump area when you are securing dishwasher to cabinet. 17