KitchenAid KUDF204KPA Owners Manual - Page 13
Removing Base Grille, Power Interruptions, Vacation Care, Moving Care
View all KitchenAid KUDF204KPA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3. Wash stainless steel and painted metal exteriors with a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners, or cleaners containing chlorine. These can scratch or damage materials. Dry immediately with a soft, dry cloth to absorb any remaining water. NOTE: To keep your stainless steel drawers looking like new and to remove minor scuffs or marks, it is recommended that you use the manufacturer's approved Stainless Steel Cleaner and Polish. To order the cleaner, refer "Accessories" section. IMPORTANT: This cleaner is for stainless steel parts only! Do not allow the Stainless Steel Cleaner and Polish to come into contact with any plastic parts such as the trim pieces, dispenser covers or door gaskets. If unintentional contact does occur, clean plastic part with a sponge and mild detergent in warm water. Dry immediately with a soft, dry cloth to absorb any remaining water. Condenser cleaning: 2. Using a Phillips screwdriver, remove the two screws. 3. Remove the base grille. To replace the base grille: 1. Open the double drawer door. 2. Position the base grille so that both tabs align and the base grille snaps into place. Replace two screws. Tighten the screws. Power Interruptions If the power will be out for 24 hours or less, keep both refrigerator drawers closed to help food stay cold. If the power will be out for more than 24 hours, do one of the following: Place all perishable food in a food locker or cooler with dry ice. If neither a food locker or cooler is available, consume food if still cold or throw away perishable food at once. Explosion Hazard Risk of fire or explosion due to puncture of refrigerant tubing. Follow handling instructions carefully. Flammable refrigerant used. 1. Remove the base grille to access condenser for cleaning. Refer "Removing Base Grille" section. 2. Clean the condenser coils regularly. They are located behind the base grille. Coils may need to be cleaned as often as every other month. This may help save energy. Vacation Care If you choose to turn the refrigerator drawers off before you leave, follow these steps: 1. Remove all from the double drawer. 2. Unplug the double drawer. 3. Clean the double drawer. Refer "Cleaning" section. 4. Tape a rubber or wood block to the top of the door to prop it open far enough for air to get in. This stops odor and mold from building. Removing Base Grille Moving Care You must remove the base grille to access the condenser coils for cleaning. When you are moving your double drawer to a new home, follow these steps to prepare it for the move. To remove the base grille: 1. Remove all from the double drawer. 1. Open the double drawer door. 2. Unplug the double drawer. 3. Clean, wipe, and dry it thoroughly. 4. Take out all removable parts, wrap them well, and tape them together so they don't shift and rattle during the move. 5. Tape the doors shut and tape the power cord to the double drawer. A. Screws A 05-May-2021 10:43:59 EDT | RELEASED When you get to your new home, put everything back and refer to the "Installation Instructions" received with the double drawer. In some European factories the letter "W" of the part code mentioned herein will be aut1o3matically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")