KitchenAid KUDF204KPA Owners Manual - Page 14
Troubleshooting
View all KitchenAid KUDF204KPA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
TROUBLESHOOTING Try the solutions suggested here first in order to avoid the cost of an unnecessary service call. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. GENERAL OPERATION Double Drawer will not operate The motor seems to run too much Possible Causes and/or Recommended Solutions Power supply cord unplugged? Plug into a grounded 3 prong outlet. Is outlet working? Plug in a lamp to see if the outlet is working. Household fuse blown, or a circuit breaker tripped? Replace the fuse or reset the circuit. If the problem continues, call an electrician. Are controls on? Be sure that the refrigerator drawers controls are on. Refer "Controls" section. Is the refrigerator control set to the Cool Off setting? See "Using the Controls." Are the refrigerator drawers not cooling? Turn them off then on again to reset. See "Using the Controls." If this does not correct the problem, call for service. Is the temperature outside hotter than normal? Expect the motor will run longer under warm conditions. At normal temperatures, expect your motor to run about 40 % to 80 % of the time. Under warmer conditions, expect it to run even more of the time. Has a large amount of food just been added to the refrigerator drawers? Adding a large amount of food warms the refrigerator drawers. The motor normally will run longer to cool the refrigerator drawers back down. Are the drawers opened often? The motor will run longer when this occurs. Conserve energy by getting all items out at one time, keeping food organized, and closing the drawer as soon as possible. Are the controls not set correctly for the surrounding conditions? Refer "Controls" section. Are the drawers not closed completely? Close the drawers firmly. If they do not close completely, see "The drawers will not close completely" later in this section. Are the drawer gaskets not sealed all the way around? Contact a technician or other qualified person. 14 05-May-2021 10:43:59 EDT | RELEASED In some European factories the letter "W" of the part code mentioned herein will be automatically replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")