Kodak 8342693 User Guide - Page 178

Scanner-specific settings DS 1500 and DS 2500 Options For most Kodak scanners (except the i50 Scanner, i60 Scanner, i80 Scanner, Scanner 3500, Scanner 3510, and Color Scanner 3590C), the Application Setup window provides a button for scanner-specific settings at the application level. Each of these buttons is described in this section. Click the DS 1500 or DS 2500 Options button to access the DS 1500 or DS 2500 Setup dialog box which allows you to define scanner-specific options for the Scanner 1500 or Scanner 2500. Feed modes The Scanner 1500 and the Scanner 2500 support four feed modes as described in this dialog box. Only the feed mode Start Scanner from PC for every new stack is currently available. In this feed mode, the paper must be in the feeder before you start the scanner from Capture Software. When the stack of paper has been scanned, or when the feeder is empty, the scanner automatically stops. The scanner must be restarted for every stack of paper to be scanned. NOTE: For the Scanner 1500, which is a combination flatbed and rotary scanner, the feed mode setting applies only to the rotary scanner. For flatbed scanning options, refer to Chapter 9, Setting Up Page Properties. A-63054 February 2004 4-5