Kodak 861 2459 User Guide - Page 56

Using the ISIS Driver The ISIS Driver is a piece of software that communicates with the scanner. This driver is created and maintained by Pixel Translations, Inc. and is provided with the scanner by Kodak. Many scanning applications support ISIS drivers and this driver can be used to interface with them. This section provides descriptions of the options on the ISIS dialog boxes and how to set these options. For the purpose of this manual, all displayed dialog boxes assume the features available on the Kodak i40 Scanner. If you have a Kodak i30 Scanner all options are limited to simplex scanning only. Scanner Settings dialog See the section entitled, "Starting the Scan Validation Tool" earlier in box this chapter to access the Scanner Settings dialog box. Buttons on the Scanner Settings dialog box Following are descriptions of the buttons located at the bottom of the dialog box. More  displays the More Scanner Settings dialog box. This dialog box provides additional image processing settings unique to i30 and i40 Scanners. Area  displays the Scan Area dialog box. Copy  this function is only available when using the scanner in duplex mode. The Copy button provides a convenient way to set up the color, grayscale or binary image settings on one side and transfer them to the other. For example, if you highlight and set up Front Binary, you can use the Copy button to duplicate those settings for Rear Binary. About  displays the About dialog box. The About dialog box provides detailed information such as the driver version number, certification status and the version of QuickDriver used to develop this driver. A-61512 May 2006 53