Kodak ATS Operation Manual - Page 9
Operation, KODAK EKTAGRAPHIC III Slide Projector - ektagraphic 3 projector
UPC - 041771070632
View all Kodak ATS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Models A, AMT and ATS Operation Open the storage compartment and remove the remote control. Plug the 5-pin cable remote connector into the remote-control receptacle, aligning the raised dot with the metallic rivet head. This receptacle also accepts plugs for accessories, such as Kodak dissolve controls. Plug the power cord into a grounded outlet with 110- to 125-volt 60 Hz current only. KODAK EKTAGRAPHIC III Slide Projector 5
KODAK EKTAGRAPHIC III Slide Projector
5
Operation
Models A,
AMT and ATS
Open the
storage compartment
and remove the remote control.
Plug the 5-pin cable remote connector into the remote-control receptacle,
aligning the
raised dot
with the metallic
rivet head
.
This receptacle also accepts plugs for accessories, such as Kodak dissolve
controls.
Plug the
power cord
into a grounded outlet with 110- to 125-volt 60 Hz
current only.