Kodak C813 User Manual - Page 48

Try one or more of the following, Decrease Exposure Compensation see - troubleshooting

Page 48 highlights

Troubleshooting If... Try one or more of the following In Review mode, ■ Check the image storage location setting (see page 25). you do not see a picture (or the expected picture) on the LCD screen. In Review mode, a ■ Transfer the picture to the computer (see page 37). blue or black ■ Take another picture. If problem continues, try internal memory and/or screen is displayed another memory card. instead of a picture. Shutter button does not work. ■ Turn on the camera (see page 2). ■ Transfer pictures to the computer (see page 37), delete pictures from the camera (see page 14), switch image storage locations (see page 25), or insert a card with available memory (see page 3). Picture is too light. ■ Move so there is at least 2 ft (0.6 m) between the camera and the subject. ■ Decrease Exposure Compensation (see page 28). Picture is not clear. ■ Clean the lens (see page 51). ■ Make sure your camera is not in Close-up mode. ■ Move so there is at least 2 ft (0.6 m) between the camera and the subject. ■ Place the camera on a flat, steady surface or use a tripod. Picture is too dark. ■ Turn on the flash (see page 7). ■ Move so there is no more than 11.8 ft (3.6 m) in wide angle and 6.9 ft (2.1 m) in telephoto between the camera and the subject. ■ Use Fill flash (see page 7) or change your position so light is not behind the subject. ■ Increase Exposure Compensation (see page 28). Camera does not ■ Purchase a certified SD card. recognize SD card. ■ Insert a card into the slot, then push to seat (see page 3). 42 www.kodak.com/go/support

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70

42
www.kodak.com/go/support
Troubleshooting
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen.
Check the image storage location setting (
see page 25
).
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
Transfer the picture to the computer (see
page 37
).
Take another picture. If problem continues, try internal memory and/or
another memory card.
Shutter button
does not work.
Turn on the camera (see
page 2
).
Transfer pictures to the computer (see
page 37
), delete pictures from
the camera (see
page 14
), switch image storage locations (
see
page 25
), or insert a card with available memory (see
page 3
).
Picture is too light.
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
Decrease Exposure Compensation (see
page 28
).
Picture is not clear.
Clean the lens (
see page 51
).
Make sure your camera is not in Close-up mode.
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
Place the camera on a flat, steady surface or use a tripod.
Picture is too dark.
Turn on the flash (see
page 7
).
Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
Use Fill flash (
see page 7
) or change your position so light is not
behind the subject.
Increase Exposure Compensation (see
page 28
).
Camera does not
recognize SD card.
Purchase a certified SD card.
Insert a card into the slot, then push to seat (see
page 3
).
If...
Try one or more of the following