Kodak DP2900 User's Guide - Page 31
Standby, Volume keypad only, If you don't press
View all Kodak DP2900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Using the Projector Standby When you press standby , the display and audio turn off and a blank screen is displayed for 15 minutes. You can change the amount of time the projector stays in standby mode; see "Standby Time" on page 38 for details. • If you press standby again within 15 minutes, the projector returns to normal operations immediately. • If you press standby again after 15 minutes, there is about a 60 second delay before the lamp turns back on. • If you don't press standby minutes. again, the lamp turns off after 15 Volume (keypad only) To increase the volume, press volume + . To decrease the volume, press volume - . Volume adjustments are saved for each source you have connected. 31
Using the Projector
31
Standby
When you press
standby
, the display and audio turn off and a
blank screen is displayed for 15 minutes. You can change the amount
of time the projector stays in standby mode; see “Standby Time” on
page 38 for details.
•
If you press
standby
again within 15 minutes, the projector
returns to normal operations immediately.
•
If you press
standby
again after 15 minutes, there is about a
60 second delay before the lamp turns back on.
•
If you don’t press
standby
again, the lamp turns off after 15
minutes.
Volume (keypad only)
To increase the volume, press
volume +
.
To decrease the volume,
press
volume -
.
Volume adjustments are saved for each source you have connected.