Kodak LS633 User's Guide - Page 93
Adjust the camera Video Out
View all Kodak LS633 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 10 Problem Cause Solution Picture is not clear. The lens is dirty. Clean the lens (page 96). Subject too close when Move so there is at least 23.6 in. taking picture. (60 cm) between camera and subject, or at least 5.1 in. (13 cm) in Close-up mode (Wide). Subject or the camera Place the camera on a flat, moved while the steady surface or use a tripod picture was taken. The subject is too far Move so there is no more than away for the flash to be 11.2 ft (3.4 m) between the effective. camera and the subject; 6.5 ft (2 m) in Telephoto. Auto focus was not achieved. To take the best possible pictures, press the Shutter button half-way and hold. When the Ready light glows green, press the Shutter button the rest of the way down to take the picture. (If the amber light blinks, release the Shutter button and recompose picture.) Slide show does not run on external video device. Video Out setting is incorrect. External device is set incorrectly. Adjust the camera Video Out setting (NTSC or PAL, page 59). See the external device's user's guide. Camera freezes Camera detected an up when a card is error when the card inserted or was inserted or removed. removed. Turn the camera off, then back on. Make sure the camera is turned off before inserting or removing a card. 81