Kodak Photo Printer 300 User's Guide - Page 27
IMPORTANT, Do not exceed the fill line, Try the following - installation
View all Kodak Photo Printer 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Troubleshooting If... Printer is jammed (Paper light, cartridge light, and/or On/Off light may blink quickly) Try the following IMPORTANT: Use only Kodak color cartridge & paper kits for your photo printer. Do not use inkjet paper. ■ If the Paper light is blinking quickly: 1 Remove the paper tray (page 6). 2 Turn the power off for 5 seconds, then turn it back on. Carefully remove the jammed paper if it does not automatically eject. IMPORTANT: Check the paper slot on the back of the photo printer for jammed paper: 3 Remove the paper supply from the paper tray. Carefully "fan" the paper to keep the sheets from sticking together. 4 Reload the paper tray. Do not exceed the fill line. 5 Re-install the paper tray, then press to resume printing. ■ If the Color cartridge light is blinking quickly, check the color cartridge: IMPORTANT: The color cartridge may lock in place if there is a paper error. Do not attempt to remove the cartridge without first clearing the paper error. Make sure the Paper light is off before attempting to remove the cartridge (see Paper light under Photo printer status lights, page 26). Remove the color cartridge, remove any slack from the ribbon, then re-install the cartridge (page 3). www.kodak.com/go/support 21