Kodak Photo Printer 300 User's Guide - Page 28

Do not exceed the fill line, Try the following, or by the removable tabs - troubleshooting

Get Kodak Photo Printer 300 - Easyshare PDF manuals and user guides View all Kodak Photo Printer 300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Troubleshooting If... Try the following Printing stops IMPORTANT: Use only Kodak color cartridge & paper kits for your photo during mid-print printer. Do not use inkjet paper. (paper stops ■ Check the paper: feeding, and Paper light and On/Off light may 1 Remove the paper tray (page 6). 2 Check the paper slot on the back of the photo printer. blink) 3 Remove loose paper from the photo printer. If paper is jammed, see page 21. 4 Inspect the paper supply: make sure removable tabs have not been detached from the paper. Reload with new paper if necessary. 5 Carefully "fan" the paper to keep the sheets from sticking together. 6 Reload the paper tray. Do not exceed the fill line. 7 Re-install the paper tray, then press to resume printing. Print is smudged ■ Fingerprints may be on glossy side of paper. Handle paper by the edges or by the removable tabs (page 4). Print is spotted ■ Check to see if the paper is dirty, and use a dry, lint-free cloth to wipe the paper clean. For excessive dirt or debris, thoroughly clean the paper tray, and load new paper (page 5). Check and clean the paper feed roller if necessary (page 18). NOTE: When storing paper, do not remove paper that is in the paper tray. Instead, remove the paper tray itself, then close the paper tray cover and paper tray door to keep out dust and debris. 22 www.kodak.com/go/support

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
22
www.kodak.com/go/support
Troubleshooting
Printing stops
during mid-print
(paper stops
feeding, and
Paper light and
On/Off light may
blink)
IMPORTANT:
Use only Kodak color cartridge & paper kits for your photo
printer. Do not use inkjet paper.
■
Check the paper:
1
Remove the paper tray (
page 6
).
2
Check the paper slot on the back of the photo printer.
3
Remove loose paper from the photo printer. If paper is jammed, see
page 21
.
4
Inspect the paper supply: make sure removable tabs have not been
detached from the paper. Reload with new paper if necessary.
5
Carefully "fan" the paper to keep the sheets from sticking together.
6
Reload the paper tray.
Do not exceed the fill line
.
7
Re-install the paper tray, then press
to resume printing.
Print is smudged
■
Fingerprints may be on glossy side of paper. Handle paper by the edges
or by the removable tabs (
page 4
).
Print is spotted
■
Check to see if the paper is dirty, and use a dry, lint-free cloth to wipe the
paper clean. For excessive dirt or debris, thoroughly clean the paper tray,
and load new paper (
page 5
). Check and clean the paper feed roller if
necessary (
page 18
).
NOTE:
When storing paper, do not remove paper that is in the paper tray. Instead, remove the
paper tray itself, then close the paper tray cover and paper tray door to keep out dust
and debris.
If...
Try the following