Kodak Zx3 Extended user guide - Page 26
Care and maintenance, Limited warranty
UPC - 041771888640
View all Kodak Zx3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Appendix Care and maintenance ■ Before inserting or removing the card/battery, make sure your hands, the camera, and the card/battery are completely dry. ■ In water, do not use below a depth of 3 meters (9.8 ft). ■ Do not open/close camera doors in water. ■ The camera will not float. Use the strap at all times. ■ If water has entered the camera, remove the battery/card. Allow all components to air-dry for at least 24 hours before using the camera. ■ If the camera was used in chemically treated water or saltwater, rinse it in fresh water, then use a soft towel to dry it. ■ Wipe off dirt or sand from the door seals-debris could compromise the seal and cause a leak in water. ■ Do not subject the camera to temperatures lower than 0 (32° F) or higher than 40° C (104° F) for an extended time-the integrity of the seals may be compromised. Wait until camera reaches operating temperatures before using. ■ Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion, to contact painted surfaces. ■ Service agreements may be available in your country. Contact a dealer of KODAK Products for more information. ■ For camera disposal or recycling information, contact your local authorities. In the US, go to the Electronics Industry Alliance Web site at www.eiae.org or go to Kodak at www.kodak.com/go/support. Limited warranty Kodak warrants its digital cameras and accessories (excluding batteries) to be free from malfunctions and defects in both materials and workmanship for the warranty 20 www.kodak.com/go/support