Konica Minolta AccurioPress C3080 Plockmatic PowerSquare R2L User Manual - Page 127

See Lift the PowerSquare 224, Close the PowerSquare 224.

Get Konica Minolta AccurioPress C3080 PDF manuals and user guides View all Konica Minolta AccurioPress C3080 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 127 highlights

6 - Maintenance - Clean the Trimmings-removal Fingers Procedure Step Action Information 1 Lift the PowerSquare 224 main See "Lift the PowerSquare 224 deck. Main Deck" on page 45. 2 Remove the trim bin. 3 Clean the four visible trimmings- The procedure can be seen from removal fingers with an alcohol the top of the machine. wipe. Access to the parts is through the former-clamp mechanism. (See Figure 64). Wear protective gloves when you use the alcohol wipe. 4 Rotate the conveyor shaft by half a 1. Hold the shaft and push to the turn. right, against spring pressure, to disengage the shaft from the drive pin.    2. Rotate the shaft by half a turn. 3. Align the shaft with the drive pin and release. 5 Clean the four visible trimmings- Wear protective gloves when you removal fingers with an alcohol use the alcohol wipe. wipe. 6 Install the trim bin. 7 Close the PowerSquare 224. Plockmatic PowerSquare™224 User Manual 121

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
6 - Maintenance - Clean the Trimmings-removal Fingers
Plockmatic PowerSquare™224 User Manual
121
Procedure
Step
Action
Information
1
Lift the PowerSquare 224 main
deck.
See “Lift the PowerSquare 224
Main Deck” on page 45.
2
Remove the trim bin.
3
Clean the four visible trimmings-
removal fingers with an alcohol
wipe.
The procedure can be seen from
the top of the machine.
Access to the parts is through the
former-clamp mechanism. (See
Figure 64).
Wear protective gloves when you
use the alcohol wipe.
4
Rotate the conveyor shaft by half a
turn.
1. Hold the shaft and push to the
right, against spring pressure, to
disengage the shaft from the drive
pin.
2. Rotate the shaft by half a turn.
3. Align the shaft with the drive pin
and release.
5
Clean the four visible trimmings-
removal fingers with an alcohol
wipe.
Wear protective gloves when you
use the alcohol wipe.
6
Install the trim bin.
7
Close the PowerSquare 224.