Konica Minolta AccurioPress C3080 Plockmatic PowerSquare R2L User Manual - Page 23

Run the Job, Procedure

Get Konica Minolta AccurioPress C3080 PDF manuals and user guides View all Konica Minolta AccurioPress C3080 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

2 - How to Run the PowerSquare 224 - Adjust the Connecting Bridge Run the Job Procedure 1. Make sure the adjustments on the PowerSquare 224 are complete before you release the print job from the print queue. 2. Start the print job. The PowerSquare 224 starts automatically. 3. Check the quality of the first book. 4. If the quality is not acceptable, make adjustments. See "Book Quality Problems" on page 66 for further information. During the job • Unload books from the stacker before the stacker is full. • The PowerSquare 224 stops and displays a message if the Book Stacker is full.See "Unload the PBS Book Stacker" on page 50. • Empty the trim bin from time to time. The PowerSquare 224 displays a message if the trim bin is full. See "Empty the Trim Bin" on page 46. • Empty the side-trim bin from time to time. The PowerSquare 224 displays a message if the side-trim bin is full. See "Empty the Side-Trim Bin" on page 52. Plockmatic PowerSquare™224 User Manual 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
2 - How to Run the PowerSquare 224 - Adjust the Connecting Bridge
Plockmatic PowerSquare™224 User Manual
17
Run the Job
Procedure
1.
Make sure the adjustments on the PowerSquare 224 are complete before
you release the print job from the print queue.
2.
Start the print job. The PowerSquare 224 starts automatically.
3.
Check the quality of the first book.
4.
If the quality is not acceptable, make adjustments. See “Book Quality Prob
-
lems” on page 66 for further information.
During the job
•
Unload books from the stacker before the stacker is full.
•
The PowerSquare 224 stops and displays a message if the Book Stacker is
full.See “Unload the PBS Book Stacker” on page 50.
•
Empty the trim bin from time to time. The PowerSquare 224 displays a mes
-
sage if the trim bin is full. See “Empty the Trim Bin” on page 46.
•
Empty the side-trim bin from time to time. The PowerSquare 224 displays a
message if the side-trim bin is full. See “Empty the Side-Trim Bin” on
page 52.