Konica Minolta AccurioPress C3080 Plockmatic PowerSquare R2L User Manual - Page 94

REMOVE SET - GATH, Folder or Former

Get Konica Minolta AccurioPress C3080 PDF manuals and user guides View all Konica Minolta AccurioPress C3080 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

5 - Troubleshooting - Message List Message Information Reference MANUALLY PARK SHUTTLE The shuttle is not parked correctly. Open the folder cover and move the shuttle to the park position. Close the folder cover. The shuttle will reset. When the message list is clear, continue operation. See "Manually park the Shuttle" on page 111. MISSING STITCHES The machine has detected missed stitches. Check if the stitch-wire is jammed or if the stitch-wire spool is empty. See "Clear a Stitch-wire Jam" on page 102 or see "Install New Stitch-wire" on page 130. MOTOR CONTROLLER The drive motor controller is not NOT READY ready. If the problem continues, contact your service engineer. OPERATOR MAINTENANCE The machine needs routine main- See "Operator tenance by the operator. Maintenance" on page 113. REBOOT THE MACHINE Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. REMOVE SET FROM FOLD AREA Open the folder cover and remove See "Jam in the the set. Folder or Former Area" on page 96. REMOVE SET - GATH- Open the gathering area and ERING AREA remove the sheets. See "Jam in the Gathering Area" on page 95. REMOVE SET STITCH AREA Open the folder cover and remove See "Jam in the the set. Stitch Area" on page 96. Rotate axis moving The rotate axis is moving. This message clears when the adjustment is complete. If the message does not clear, touch ADVANCED > RE-REF. ROTATE - No comms Use the mains ON/OFF switch. Turn the machine OFF, then turn the machine ON. If the problem continues, then call your service engineer. 88 Plockmatic PowerSquare™224 User Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
5 - Troubleshooting - Message List
88
Plockmatic PowerSquare™224 User Manual
MANUALLY PARK
SHUTTLE
The shuttle is not parked correctly.
Open the folder cover and move
the shuttle to the park position.
Close the folder cover. The shuttle
will reset. When the message list
is clear, continue operation.
See “Manually
park the Shuttle”
on page 111.
MISSING STITCHES
The machine has detected missed
stitches.
Check if the stitch-wire is jammed
or if the stitch-wire spool is empty.
See “Clear a
Stitch-wire Jam”
on page 102 or
see “Install New
Stitch-wire” on
page 130.
MOTOR CONTROLLER
NOT READY
The drive motor controller is not
ready. If the problem continues,
contact your service engineer.
OPERATOR MAINTE
-
NANCE
The machine needs routine main
-
tenance by the operator.
See “Operator
Maintenance” on
page 113.
REBOOT THE
MACHINE
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
REMOVE SET FROM
FOLD AREA
Open the folder cover and remove
the set.
See “Jam in the
Folder or Former
Area” on page 96.
REMOVE SET - GATH
-
ERING AREA
Open the gathering area and
remove the sheets.
See “Jam in the
Gathering Area”
on page 95.
REMOVE SET -
STITCH AREA
Open the folder cover and remove
the set.
See “Jam in the
Stitch Area” on
page 96.
Rotate axis moving
The rotate axis is moving. This
message clears when the adjust
-
ment is complete.
If the message does not clear,
touch
ADVANCED
>
RE-REF
.
ROTATE - No comms
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON.
If the problem
continues, then call your service
engineer.
Message
Information
Reference